How To Reset Maintenance Light On Toyota Corolla 2018. Turn the key back to “off.”. Reset maintenance light with color display.
Make sure the odometer is displayed. Turn the key back to “off.”. Turn the ignition switch to the on position.
The Odometer Should Display The Miles, Not The Trip Meter.
Insert the keys in the corolla. Turn the key back to “off.”. Turn the vehicle off and press the trip meter reset button.
As Oil Is Burned At A High Rate, The Engine May Need Oil Every Couple Of Weeks.
Push and hold the reset button on the trip meter. Press and hold the trip reset button near the odometer until “trip a” appears on the central screen. While pressing the button to reset the trip, turn the key back to the “on” position.
Release The Trip Odometer Reset Button After 000000 Appears On The Trip Odometer Display And The Maintenance Light Turns Off.
On vehicles with start/stop button, press it twice without touching the brake pedal. Go in the car and crank it up. Turn the key back to “off.”.
Turn your corolla on, but don’t start the engine.; Turn the car back on, without starting the engine, and hold the trip reset button until your odometer flashes 0.; Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light.
Turn The Key Back On Again, But Not To The Start Position.
Make sure that your do not start the key when turning the key. Find the trip reset button by the odometer.; Just now june 9, 2022 heatstar heater won't start.